Kloeckner Santa Fe Springs | Kloeckner Metals Santa Fe Springs

Branch overview

The Kloeckner Santa Fe Springs branch is located in southeast Los Angeles County and serves as a gateway to Los Angeles. With a total metropolitan area of about 19 million, Los Angeles is more than its heavy traffic, Hollywood glamour, and historic sports franchises, it is also the home of Kloeckner SFS’s 275,000 sq. ft plant and 7,500 sq. ft. open-floor office. With a vast catalog of heavy carbon, ferrous and non-ferrous flat-rolled, and architectural products, Kloeckner’s largest West Coast branch caters to multiple industries. Along with its in-house processing capabilities, SFS is strategically located close to the Port of Long Beach and domestic mills, enabling faster lead times and more product control. Kloeckner SFS is always taking strides to move the industry forward and prides itself on its innovation, digitalization, and transparency.

SFS ISO 9001 2015 Certificate

Branch Gallery

Los Angeles Kloeckner Metals Branch

9804 Norwalk Boulevard; Building A

Santa Fe Springs, California 90670

(562) 906-2020

Toll Free: (800) 826-8479

Get In Touch

Sergio Torres

Regional Manager

Information

Facts
- The SFS facility is approximately 220,500 sq. ft. on 12 arches.
- Products carried in the Los Angeles/SFS branch are carbon steel (coated and bare), prepainted, stainless steel, heavy carbon plate, aluminum, HR sheet and numerous carbon plate grades in the “As- rolled”, normalized and quenched & tempered conditions.
- Santa Fe Springs delivers daily throughout California and the bordering states and next day delivery is available as well.
- Company owned trick fleet with onboard Trimble tracking and navigation systems.
- SFS is an ISO 9001:2015? registered quality management system.
Special Programs
Special programs in SFS include:
- Just-in-time stocking programs and consignment programs tailored to customer’s requirements
- Rail served facility by Union Pacific Railroad
- Toll Processing
- Kanban programs
- Fully integrated Service Center with fabrication services
- Part Manager, Kloeckner’s Contract Management Portal
Key Equipment
Type of Equipment:
- 6 Oxy-fuel / Plasma cutting machines with table sizes up to 298″ in width & 720″ in length
- 1″ Plate laser with a table size of 147″ in width x 672″ in length
- 1/2″ x 96″ wide Herr Voss Plate Leveler with “in house” testing to meet ASTM plate certifications
- 6 Press Brakes. Press braking up to 52′ lengths with tandem 26′ Cincinnati press brakes.
- Plate Rolling – 1-1/2″ x 120″ wide and 5/8″ x 32″ wide on specialized plate rolls.
- Specialized “bump” forming and plate beveling performed daily.
- Code welding “in-house” by certified welders
- Herr-Voss/Red Bud CTL line; Herr-Voss multi-head leveler line; three-head Loopco slitting line; manual PVC applicator
  Material processed: Carbon, Stainless, Prepaint, Aluminum
  Material Width: 60″ (slitting and leveling)
  Material Thickness: .007″ through .130″
  Tolerances: +/- .005″ (width and length)
  Features: Loopco slitter avoids coil breaks HerrVoss/ Red Bud multi-blanking line and Herr-Voss line with PVC paper applicator.

Facts

The SFS facility is approximately 220,500 sq. ft. on 12 arches.
Products carried in the Los Angeles/SFS branch are carbon steel (coated and bare), prepainted, stainless steel, heavy carbon plate, aluminum, HR sheet and numerous carbon plate grades in the “As- rolled”, normalized and quenched & tempered conditions.
Santa Fe Springs delivers daily throughout California and the bordering states and next day delivery is available as well.
Company owned trick fleet with onboard Trimble tracking and navigation systems.
SFS is an ISO 9001:2015? registered quality management system.

Special Programs

Special programs in SFS include:

Just-in-time stocking programs and consignment programs tailored to customer’s requirements
Rail served facility by Union Pacific Railroad
Toll Processing
Kanban programs
Fully integrated Service Center with fabrication services
Part Manager, Kloeckner’s Contract Management Portal

Key Equipment

Type of Equipment:

6 Oxy-fuel / Plasma cutting machines with table sizes up to 298″ in width & 720″ in length
1″ Plate laser with a table size of 147″ in width x 672″ in length
1/2″ x 96″ wide Herr Voss Plate Leveler with “in house” testing to meet ASTM plate certifications
6 Press Brakes. Press braking up to 52′ lengths with tandem 26′ Cincinnati press brakes.
Plate Rolling – 1-1/2″ x 120″ wide and 5/8″ x 32″ wide on specialized plate rolls.
Specialized “bump” forming and plate beveling performed daily.
Code welding “in-house” by certified welders
Herr-Voss/Red Bud CTL line; Herr-Voss multi-head leveler line; three-head Loopco slitting line; manual PVC applicator
Material processed: Carbon, Stainless, Prepaint, Aluminum
Material Width: 60″ (slitting and leveling)
Material Thickness: .007″ through .130″
Tolerances: +/- .005″ (width and length)
Features: Loopco slitter avoids coil breaks HerrVoss/ Red Bud multi-blanking line and Herr-Voss line with PVC paper applicator.